PCB Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| PCB Type | FR4 PCB | Quantity | 375 pcs |
| Layers | 16 Layers | Board Type | Panel PCB |
| Dimensions | 20.2 x 32.3 mm | Copper Weight | 1oz |
| Thickness | 2.2 mm | Min Track / Spacing | 4/4mil |
| Surface Finish | ENIG (Immersion Gold) | Min Hole Size | 0.1mm |
| Solder Mask | Green | Silkscreen | None |
| Stack-up | Custom | Impedance Control | No |
Manufacturing Timeline
Logistics Information
Key Manufacturing Processes
Manufacturing Summary
This 16-layer HDI board measured 20.2 × 32.3 mm with mixed 2 oz / 1 oz copper and a 2.2 mm finished thickness using Shengyi S1000-2M TG170 material. Produced in a quantity of 375 pieces as 3×5 panels with 4 mm process edges on all sides, the design featured 4 mil line/space, 0.1 mm holes, blind vias, resin plugging, and ENIG surface finish. The high layer count and tight geometry on a relatively small panel presented significant stackup and plating challenges.
DFM review required multiple adjustments to the provided stackup. The original dielectric thicknesses were too thin to reliably achieve 2.2 mm finished board thickness without delamination risk using the minimum 0.11 mm 2 oz cores. Copper weight conflicts arose from the 4 mil geometry, where 2 oz outer layers would remove excessive copper bridges. Through-hole vias overlapping SMT pads risked voids without plugging. Final configuration used 1 oz on layers 1-2-3-14-15-16 and 2 oz on remaining layers to balance thickness and spacing requirements. Stamp hole panelization was adopted due to panel size constraints. Resin plugging reliability handling was implemented for vias on pads to prevent solder joint defects.
Production advanced after customer confirmation of the revised stackup and panel method. All boards passed 100% flying probe testing and met dimensional tolerances despite the high layer count and mixed copper configuration, supporting reliable performance for this volume order.
Explore More PCB Manufacturing Resources
ENIG FR4 PCB Manufacturing Insights
FR4 material with ENIG finish provides balanced electrical performance, shelf life, and assembly compatibility for industrial and high-reliability electronics.
FR4 PCB Surface Finish Guide: ENIG vs HASL vs OSP DFM Issues and Engineering Queries
Explore common engineering queries in ENIG, HASL, and OSP FR4 PCBs. Learn real DFM challenges, surface finish compatibility issues, and practical solutions to reduce manufacturing risks and improve yield.
Real Production Records
| Order ID | PCB Type | Layers | Dimensions | Solder Mask | Surface Finish | Quantity | Action |
|---|---|---|---|---|---|---|---|
| FR4-20260520-046 | FR4 PCB | 2 | 94.21 x 275 | Green | ENIG (Immersion Gold) | 75 | View detail |
| FR4-20260519-001 | FR4 PCB | 10 | 67.6 x 42 | Green | Gold Plating | 20 | View detail |
| FR4-20260515-068 | FR4 PCB | 14 | 244 x 267 | Green | ENIG (Immersion Gold) | 10 | View detail |
