PCB Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| PCB Type | Rogers PCB | Quantity | 15 pcs |
| Layers | 2 Layers | Board Type | Single PCB |
| Dimensions | 542.5 x 62.5 mm | Copper Weight | 1oz |
| Thickness | 0.508 mm | Min Track / Spacing | 5/5mil |
| Surface Finish | ENIG (Immersion Gold) | Min Hole Size | 0.4mm |
| Solder Mask | None | Silkscreen | None |
| Material Type | Rogers/RO4003C |
Manufacturing Timeline
Logistics Information
Key Manufacturing Processes
Manufacturing Summary
For this Rogers PCB production, we manufactured 15 single boards using RO4003C material in a 2-layer stackup. The elongated panels measure 542.5 x 62.5 mm with an overall thickness of just 0.508 mm. With 5/5 mil minimum track and spacing on 1 oz copper, no soldermask or silkscreen, and immersion gold ENIG finish, the job centered on preserving the low-loss dielectric characteristics essential for RF performance.
Rogers material preparation and low loss material lamination received focused attention to avoid distortion on the thin, narrow substrates. Circuit imaging and etching achieved the required finer geometries, after which we performed electroless nickel and immersion gold deposition to coat the exposed pads and traces. The absence of solder mask simplified certain steps but demanded extra precision during handling and testing.
All boards underwent electrical testing and met specifications without issue. This order was completed in 5.3 days, yielding reliable parts that align with the demanding parameters of the design.
Explore More PCB Manufacturing Resources
2 Layer Rogers PCB Manufacturing Insights
Rogers high frequency laminates demand specialized processing to maintain dielectric stability and signal integrity in RF designs.
Troubleshooting Common Manufacturing Challenges with Rogers PCBs
Master troubleshooting common Rogers PCB manufacturing challenges including drilling defects, plating adhesion, delamination, and CTE mismatch. Learn practical solutions, process adjustments, and DFM tips to improve yield for high-frequency RO4000, RO4350B, and PTFE-based boards.
Real Production Records
| Order ID | PCB Type | Layers | Dimensions | Solder Mask | Surface Finish | Quantity | Action |
|---|---|---|---|---|---|---|---|
| ROG-20260527-071 | Rogers PCB | 2 | 81.7 x 81.7 | None | ENIG (Immersion Gold) | 15 | View detail |
| ROG-20260331-008 | Rogers PCB | 2 | 86 x 57.7 | Green | ENIG (Immersion Gold) | 50 | View detail |
| ROG-20260321-048 | Rogers PCB | 2 | 103.93 x 43.99 | Green | ENIG (Immersion Gold) | 25 | View detail |
