2 Layer FR4 PCB Production Record #FR4-20261017-008

This order consisted of five single 2-layer FR4 PCBs measuring 53.34 × 85.1 mm with standard 1.6 mm thickness and 1 oz copper weight. Minimum trace width and spacing of 6/6 mil together with 0.3 mm hole size placed the design within conventional parameters, enabling straightforward material preparation and circuit imaging followed by precise etching. The modest quantity and absence of impedance control or blind vias allowed the team to follow standard process flows while maintaining close attention to registration and edge quality.

Green solder mask and white silkscreen were applied before HASL Lead Free surface finish. Molten solder coating and hot air leveling produced a uniform protective layer that supports reliable through-hole and SMT soldering. Every board then completed full electrical testing to confirm net continuity and isolation, with all five units passing without rework.

The complete run was delivered in 2.2 days, reflecting efficient execution of the required steps for this standard-spec FR4 PCB. The finished boards arrived with consistent finish and dimensional accuracy, ready for immediate assembly.

This order also received positive feedback from the customer regarding the consistent quality and reliable delivery. View the full customer review→